Pallet Rack World Products | Meco Omaha | Series 3000 Heavy Duty Cantilever Rack | Bar Storage Rack | Pipe Rack
Series 3000 Heavy Duty Cantilever Rack
Meco Omaha Series 3000 Heavy Duty Cantilever Rack is designed for tough applications. Choose from either single sided or double sided cantilever uprights. The uprights range from 8′ high all the way up to 20′ high on 2′ increments. The bases on the single sided uprights are either 31”, 37”, 49”, 61” or 74” long. The bases on the double sided uprights are either 53”, 65”, 82”, 106” or 130” long. There are many different weight capacities to choose from. Choose either straight arms or inclined arms with a lip or no lip. The arms feature sizes of 12”, 18”, 24”, 30”, 36”, 42” and 48”, 54” and 60” long. The capacities very depending on the length of the arm. The shorter the arm, the higher the capacity. For example the 12” long arm holds a 3,000lbs capacity. On the other hand, the 60” long arm features a 600lbs capacity.
The arms can be used on Series 3,000, 4,000, or 5,000 uprights only. Capacities are based on an evenly distributed load. For more information on this product, contact us today!
Pictured Above: Meco Omaha Series 3000 Single Sided Uprights with bases, arms and braces.
Series 3000 Heavy Duty Cantilever Rack Uprights
For your normal industrial storage requirements
Pictured Above: Meco Omaha Series 3000 Single Sided Uprights with bases, arms and braces.
Series 3000 Cantilever Rack Brace Sets
All braces can be used on Series 3000, Series 4000, or Series 5000 Uprights only.
Length of braces is measured from center of upright to center of upright.
Pictured above: Cantilever Rack arms – straight with no lip
Series 3000 Heavy Duty Cantilever Rack Arms
These cantilever rackarms can beused on Series 3000, Series 4000, or Series 5000 Uprights only. Capacities are based on an evenly distributed load. Note that armlips are not intended to bear any portion of the load.
Cantilever Rack straight arms through 48” long have a minimum pitch of 3/8” per foot to compensate for deflection. 54” and 60” straight arms have a minimum pitch of 5/8” per foot.
Cantilever Rack inclined arms have a pitch of 20 degrees or approximately 4.36” per foot.
Pictured above: Cantilever Rack arms – inclined w/ lip